Lab Incubator is an apparatus which used to control environmental conditions, such as temperature,percentage of gas(like Oxygen, CO2) and humidity, can be controlled, often used for growing bacterial cultures, hatching eggs artificially, or providing suitable conditions for a chemical or biological reaction. Infant Incubator is used in hospitals to provide control environmental factors such as temperature, humidity, and oxygen concentration to the new brown babies.
Theory of operation
In general, these have a system of electrical heating element controlled by thermostats or microprocessors.User can adjust temperature and other necessary parameter (Oxygen percentage, CO2 percentages etc. ) according to the requirements. However according to the manufacturer and machine models the number of parameters that can be handle would have differences.
Planed Preventive Maintenance (PPM) check list
The objective of Planed preventive maintenance is a continuous, precise operation of your equipment, to secure your investments for the long term and to guarantee correct and proper function.These are common things have to be considered on PPM but some mandatory things may include in manufacturer's service manual and they are depend on the product specifications and can't predefine for each and every production.
In general, these have a system of electrical heating element controlled by thermostats or microprocessors.User can adjust temperature and other necessary parameter (Oxygen percentage, CO2 percentages etc. ) according to the requirements. However according to the manufacturer and machine models the number of parameters that can be handle would have differences.
Planed Preventive Maintenance (PPM) check list
The objective of Planed preventive maintenance is a continuous, precise operation of your equipment, to secure your investments for the long term and to guarantee correct and proper function.These are common things have to be considered on PPM but some mandatory things may include in manufacturer's service manual and they are depend on the product specifications and can't predefine for each and every production.
- Door, door hinges, door catches, and safety switches
- Alignment check.
- Actual and Display temperature deviation check.
- Gas leakage test (if any gas is being using)
- spore test (if any contamination issue)
No comments:
Post a Comment